Disc and drum brake hardware, quoted and built by the number.

DIB kits, brake shims, attaching hardware, electronic wear sensors and traditional hardware kits for pad makers, brake brands and distributors. Disc and drum parts for passenger cars, light, medium, heavy-duty trucks and school buses. Send an FMSI or OE number and an associate from McHenry, IL will quote it.

Electronic wear sensors

DIB kits
Brake shims
Attaching hardware
Traditional hardware
Commercial
Exploded front disc brake with eight numbered hardware parts: pad shims, piston clip, wear sensor, guide pins and boots, abutment clips, anti-rattle spring, bleeder screw, bracket boltsExploded front disc brake with eight numbered hardware parts: pad shims, piston clip, wear sensor, guide pins and boots, abutment clips, anti-rattle spring, bleeder screw, bracket boltsExploded front disc brake with eight numbered hardware parts: pad shims, piston clip, wear sensor, guide pins and boots, abutment clips, anti-rattle spring, bleeder screw, bracket bolts

Our hardware, on one front brake.

One front disc brake, opened up. The numbered parts are ours. The caliper, piston, rotor and pads are shown for fit.

1
Pad shims

Stop the squeal between pad and piston.

2
Piston clip

Holds the pad to the piston.

3
Wear sensor

Warns the driver before the pad is gone.

4
Guide pins and boots

Let the caliper float. The boots keep grit out.

5
Abutment clips

Hold the pad square in the bracket so it slides instead of sticking.

6
Anti-rattle spring

Keeps the pad quiet on rough road.

7
Bleeder screw

Lets the air out, then stays sealed.

8
Bracket bolts

Carry the stop into the knuckle.

Six lines, one manufacturer.

Disc and drum hardware for passenger cars, light, medium, heavy-duty trucks and school buses. Quoted by FMSI or OE number.

Bagged per FMSI application, or packed in your own branded boxes.

5,000+
applications covered

Commercial vehicle hardware

Brake hardware for medium and heavy-duty trucks and buses.

Trucks and buses
Coming in 2027!
No items found.

Traditional hardware

Boxed disc and drum kits, guide pin and boot kits, bolts and bleeder screws, packed in your own branded boxes.

Disc and drum
Traditional brake hardware: springs, guide pins, boots, bolts and adjuster parts
Disc brake hardware kits

Disc brake hardware kits

Available

SKUs
Drum hardware kits

Drum hardware kits

Available

SKUs
Self-adjuster kits

Self-adjuster kits

Available

SKUs
Drum-in-hat parking brake kits

Drum-in-hat parking brake kits

Available

SKUs
Guide pin kits

Guide pin kits

Available

SKUs

Attaching hardware

The clips, springs and counterweights that keep the pads in place and quiet.

1,000+
applications
Attaching hardware: piston clips, abutment clips, anti-rattle springs, pad retaining clips and counterweights
Piston clips

Piston clips

Available

SKUs
Two disc brake pad hold-down clips

Hold-down clips

Available

SKUs
Anti-rattle clips

Anti-rattle clips

Available

SKUs
Abutment clips

Abutment clips

Available

SKUs
Mechanical wear sensors

Mechanical wear sensors

Available

SKUs

Brake shims

Tabbed and stake-on, with or without adhesive.

1,600+
applications
Brake shims: tabbed shims and curved stake-on shims, in black and stainless
Tabbed shims

Tabbed shims

Available

SKUs
Stake-on shims

Stake-on shims

Available

SKUs

Drop-in-the-box kits

Caliper and abutment clips, bagged per application and ready to pack with a pad set.

2,400+
applications
Drop-in-the-box kit parts: tabbed pad shims and abutment clips in two rows
Abutment clips, bare

Abutment clips, bare

Available

301 stainless, heat treated.

SKUs
Q-grade clips

Q-grade clips

Available

301 stainless with NBR rubber.

SKUs
QX-grade clips

QX-grade clips

Available

Stainless with NBR rubber and OE-grade PTFE.

SKUs

Electronic wear sensors

OE-equivalent fit, form and function. Housings, wires and terminals built to take brake heat.

350+
part numbers
Four electronic brake pad wear sensors with wires and connectors
Electronic wear sensors

Electronic wear sensors

Available

350+
SKUs

Send a number. Get a quote.

Give us an FMSI or OE number and a quantity. An associate from McHenry, IL cross-references it and sends your quote. We don’t publish a part-number catalog: our numbers are different from anyone else’s, so send the one you use.

Thanks. We have your number.

An associate from McHenry, IL will reply by email.

Your number didn’t go through.

Please try again, or call 815-425-8088.

Quoting a whole program? Use the full quote form

Small brake parts make a big difference.